Home | Recipes | Beer recipes | All grain recipes | Admiralty Ale (All grain recipe)
Admirality all grain beer

Admiralty Ale (All grain recipe)

Brew time:

4 hours

Maturation :

21 days minimum


5 gallons (22litres)


All grain recipes, Beer recipes, British Ale

0.0 out of 5 stars (based on 0 reviews)
Skip to method Read reviews


  • 5kg Maris Otter Pale Malt
  • 100g Medium Crystal Malt
  • 125g Dextrin Malt
  • 40g Amarillo Hops (bittering)
  • 40g Citra Hops (bittering)
  • 20g Motueka Hops (bittering)
  • 15g USA Chinook Hops (flavour)
  • 1 packet of Safale 04 Yeast
  • Britewort Tablet (half)
  • 1 dose of Pure Brew
  • Brew Fizz Carbonation Drops for bottling.
  • Starbrite Beer Finings


ABV: 5%

Original Gravity: 1050

Target Final Gravity: 1012 


Heat 15 litres of water to around 165°F (74°C). Add the crushed grains to the water and stir well to ensure there are no dry clumps. The temperature should stabilise at around 150-152°F (65-67°C). Maintain this temperature for 60 minutes. This process is called mashing and converts the starches in the grains into fermentable sugars. Note, even a 2-degree variation on temperature can result in a sweeter or drier beer so be accurate with temperature maintenance! 


After the mashing process, heat another 15 litres of water to around 170°F (77°C). Slowly pour this hot water over the mashed grains to rinse out the sugars. Collect the liquid (wort) in your brew kettle. Take time over this process. Imagine the malt grains as upturned umbrellas. You are aiming to gently rinse out the sugars (sweet wort) and hold back any unconverted starch. 


Bring the wort to the boil. Once boiling, add the bittering hops (40g of Amarillo,40g Citra, 20g Motueka) and boil for 60 minutes. Maintain a rolling boil and prevent boil-overs. 

Hop Additions

After 45 minutes of boiling, add the second batch of flavour hops (50g of Cascade) and a half a Britewort tablet. At the end of the boil (60 minutes), add the third batch of aroma hops (15g of Chinook) and turn off the heat. Let the wort sit for a few minutes before cooling. This process is known as Flameout. 


Cool the wort as rapidly as possible to around 70-75°F (21-24°C). You can use an immersion chiller or an ice bath to speed up the process. 


Transfer the cooled wort to a sanitised fermenter (a plastic bucket fitted with an airlock). Pitch the yeast and Pure Brew into the fermenter. Stir vigorously with a beer paddle for 2 minutes to oxygenate the wort, then seal it with a lid and airlock. Place the fermenter in a cool, dark place with a stable temperature of 65-70°F (18-21°C). 

Primary Fermentation

Allow the beer to ferment for about 10-14 days. During this time, the yeast will convert the sugars into alcohol. Once the airlock stops bubbling and a hydrometer reading of around 1.010 is achieved the fermentation will have finished. At this point add Starbrite finings to ensure your final beer is clear.   


After primary fermentation is complete transfer the beer to sanitised bottles using a syphon tube or bottling stick. Add one Brew Fizz Carbonation Drop to each bottle, then cap the bottles. 


Store the bottles in a warm place (around 70°F/21°C) for 7 days to carbonate. Then, move the bottles to a cooler place for another week or two to condition. 


Your homebrewed Admiralty Ale is now ready! Chill the bottles, pour into a glass, and savour the fruits of your labour. 

Did you know?

Admirality Ale features in the online game World of Warcraft. It’s sold by Brewer Gerrat at the seasonal Brewfest Grounds event. The WOW brew is described as a fairly week beverage so they’re probably using a different recipe.


See what other brewers have to say or leave a review and let us know what you think.

There are no reviews yet. Be the first one to write one.

Leave a review

Item added to cart.
0 items - £0.00